Tutorial | Speedlite Flash for Canon by Altura Photo | Off Camera High Speed Sync


Izzy here from Digital Goja Today I’m going to go over a frequently asked question about the Altura Photo APC-958x flash Remember, if this video helps you hit me up with a like button underneath and subscribe to our channel and don’t forget if you’re in Miami come say hello at Digital Goja Showrooms Can I do high-speed sync off camera with the APC-958x from Altura Photo? Absolutely, but you have to set it up first of all, you got to press your control dial here so you activate your high-speed sync next, we have to set it up so that one of the flashes and the one that’s on the camera has to be set to the master and you have to have a second flash which will be your slave so first let’s do this one which is on the camera hold down the Zoom button and you’re going to move it to master “ON” and there you have it now this guy is your master control flash now I’m going to show you how to do it with a secondary flash Alright, so as you can see I already have it set up on my light stand this is my secondary flash this is another Altura APC APC-958x have it set to high-speed sync but now we’re going to hold down the Zoom button and now I’m going to set this one to slave mode so now when I fire with my primary one this guy’s going to fire off and again it’s going to shoot at high-speed sync and we’ll show you some images that we did Well I hope I answered your question about the Altura Photo APC-958x if I didn’t please leave the question below in the comments section and I’ll get to it to answer for you and don’t forget subscribe to our channel for future frequently asked questions Happy Shooting!

3 Replies to “Tutorial | Speedlite Flash for Canon by Altura Photo | Off Camera High Speed Sync”

  1. Hey Izzy I have a trick question. Can I use my yongnuo wireless triggers to fire off the Altura flash in master mode which in turn will fire off my Canon 430ex II in slave mode? I'm trying to double up and have 2 flashes inside 1 softbox / umbrella. Or is the Wireless trigger > Master > slave combination not possible? Thanks.

Leave a Reply

Your email address will not be published. Required fields are marked *